Best Quiet Washer-Dryers in the UK (2026)

Start with two capacities and one noise phase

A washer-dryer has separate wash and dry limits. The declared noise figure used here describes spinning, not drying or every part of the wash. A useful comparison must keep all three facts separate instead of calling the whole appliance quiet.

Who this is for

This route is for buyers who need one combined appliance, can plan around a lower dry capacity and want to compare declared spin noise with installed depth and label consumption.

Who this is not for

It is not for anyone expecting a full wash load always to dry unchanged, guaranteed quiet drying, first-party acoustic measurements or a universal energy-saving outcome.

Quick decision

• Bosch WNC254ARGB: joint-lowest declared spin figure here, 10.5kg wash and 6kg dry.
• Haier HWD120-B14367UUK: 12kg wash and 8kg dry with 70 dB class A spin noise.
• LG FWY916WBTN1: 11kg/6kg with a published 565mm body depth.
• Samsung WD10HG6U94BEU1: 10kg/6kg with 590mm body depth and 645mm including protrusions.

Compare the exact installation formats

Bosch measures 848 x 598 x 622mm and publishes 70 dB. Haier matches that declared figure while increasing capacities to 12kg/8kg; its 33 kWh wash-only and 371 kWh combined figures refer to different label cycles and cannot be compared as one number.

LG publishes 600 x 850 x 565mm, 11kg/6kg and 71 dB. Samsung publishes a 590mm body but 645mm including protrusions, showing why headline depth alone is unsafe. It provides 10kg/6kg, 72 dB class A, 51 kWh wash-only and 308 kWh combined per 100 cycles.

Model the wash-to-dry workflow

Start with a normal load rather than the maximum wash number. Bosch accepts 10.5kg for washing but 6kg for drying; Haier publishes 12kg and 8kg; LG 11kg and 6kg; Samsung 10kg and 6kg. If a routine wash exceeds the dry limit, decide what will be removed, where it will dry and whether the remaining load still fits the chosen programme. One cabinet footprint does not remove that handling step.

Keep the energy figures on their stated bases. A wash-only label and a complete wash-and-dry label describe different jobs, so the larger combined figure is not evidence that the product is inefficient at washing alone. Equally, the spin dB result does not measure drying sound, pump sound, vibration or the duration of either cycle. Compare exact capacities, body and full depth, then use the declared spin result as one bounded field.

A combined machine can be coherent where a second appliance cannot fit, but it also runs the two jobs serially. Consider whether the household can wait for a combined programme, split larger loads and retain service access. If those constraints fail, the broad washing-machine route plus a separate drying decision may be more useful than optimising the small dB differences in this set.

Run the checks

Plan a normal wash load and decide what portion can enter the drying phase. Measure installed depth including protrusions, door, hoses and manufacturer gaps. Confirm ventilation, water, waste, electrical supply and access. Compare spin noise only as a phase label and compare energy on like-for-like wash-only or combined cycles. Verify exact model and current delivery, installation, returns and warranty.

Use the broad washer-dryer route when noise is secondary, or the quiet wash-only route when a separate drying plan is viable.

Known limitations

UK Shortlists has no first-party washing, drying, condensation, acoustic, vibration, duration or durability measurements. Published label and capacity facts enable structured comparison but cannot guarantee room sound, usable load, results, running cost or live commercial terms.